Femooi FH1.0 Manual de instruções - Página 10

Procurar online ou descarregar pdf Manual de instruções para Equipamento Cosnetic Femooi FH1.0. Femooi FH1.0 16 páginas.

①

Note:

The device only starts functioning when the built-in intelligent infrared sensor system senses the

skin

In order to avoid overuse, the default treatment time of the Nano Meso Mode is 10 minutes each

time, after which the device will continuously beep twice to remind you the treatment has ﬁnished.

In order to avoid overuse, the default treatment time of the Phototherapy Mode

is 20 minutes each time, after which the device will continuously beep twice to remind you the

treatment has ﬁnished.

The infrared light wavelength is beyond the visible range of the naked eye, therefore this light is not

visible during the Phototherapy Mode

Detailed Steps

Nano Meso Mode

STEP1:

Cleanse the face.

STEP2:

Follow the "Installation of cartridge with serum" instructions to

install the cartridge with serum.Press the Nano Meso Mode

button

the intensity, you can press the Nano Meso Mode button

again to select the desired intensity. For speciﬁc usage, please

refer to the instructions in the "Description of the modes".Posi-

tion the Nanocrystalline needle surface in horizontal contact

with the skin, you will observe a slight downward motion of the

needle surface. To start the treatment, gently but quickly move

the device up and down.The used force should be adjusted

according to the contact with the skin.

Tip：

During treatment, start at the bottom of the face and move

upwards.

①　

Red light lamps

②

Infrared light lamps

to turn on the Nano Meso Mode ; If you need to adjust