Fencee power DUO PD50 Manual de instruções de utilização - Página 7

Procurar online ou descarregar pdf Manual de instruções de utilização para Fonte de alimentação Fencee power DUO PD50. Fencee power DUO PD50 20 páginas.

Imprimir página

5. INTRODUCTION

Energizers power DUO PD may be either powered from 230 V mains using 14 V power supply

adapter (include in the package contents) or appropriate 12 V battery.

The integrated microprocessor fully controls the operation and ensures optimal performance

taking into account the condition of the fence system and the current situation.

The fence load is continuously measured during the fence systems operation. The energizers

power output is then automatically adjusted to keep the required output vol tage in the widest

possible load range. This control significantly aids in saving energy when using quality fence

system with a low load. It also optimises energy consumption to maintain adequately high

fence system voltage, which is, for example, overgrown with grass (high load).

LED indicator lights and BARGRAF on the front of the energizer show the power supply status

and fence system voltage and also signal any potential faults on the fence.

5.1 Energizers PD with power output higher than 5 J

Standard's special requirements must be observed for energizers with power output higher

than 5 J, namely time cut-off limit when the power output is increased and thus ensuring

safety.

Products must be identified by mark.

fencee energizers have time cut-off limit of 50 seconds, which means that whilst the fence

system is under load and its resistance drops below 500 Ohm (overgrown grass, fallen branches,

etc.), the energizer will supply the maximum of 5 J for 50 s. If the fence system resistance does

not increase during this time (carrying out corrective measures), the energizer will gradually

increase the power output.

Acoustic and visual warning when the fence system is suddenly under load is another feature.

If the fence resistance drops abruptly during one pulse from over than 1,000 Ohm to less than

400 Ohm (fallen branches, tangled animal or human, etc.), alarm is triggered after six pulses,

acoustic warning and red LED indicator light flashes. At the same time, the pulse period is

shortened to 3 s. The alarm is switched off after increasing the fence resistance to more than

600 Ohm or after the time limit of 10 min. Both functions are independent and separate.

5.2 List of main advantages

Czech product

Special transformer ST

extra high voltage with long term protection

Smart Control technology ensures

microprocessor-controlled operation and optimal performance

3 years warranty