Avnet Reach Further Ultra96-V2 Manual - Página 10

Procurar online ou descarregar pdf Manual para Placa-mãe Avnet Reach Further Ultra96-V2. Avnet Reach Further Ultra96-V2 15 páginas.

3 Errata

3.1 Quick-Start Cards States No LED Lit When Powered Off

Kits whose Ultra96-V2 boards have a datecode of 1927 or earlier include a printed Quick-Start Card

with this error.

The printed Quick-Start Card does not properly account for LED D17, which is the 12V VIN LED.

Any time a live 12V is plugged into the barrel jack, this LED will light, regardless of the power state

of the board. The intention for this LED is to remind users that 12V is active any time that the barrel

jack is plugged in. The barrel jack must be unplugged when pods or mezzanines are attached or

detached from the Ultra96-V2.

The Quick-Start Card should have identified the LED in Step 5. Step 8 claims after the shutdown

sequence that "All the LEDs will turn off." This is incorrect as D17 will not turn off until the barrel

jack is unplugged.

An updated digital copy of the Quick-Start Card with these corrections is available at

http://avnet.me/ultra96-v2

New kits will be produced with the updated Quick-Start Card. These will have datecode 1931 or

later.

 Documentation.

Page 5