AB Quality ArmorPoint 1738-IB2M12 Manual de instruções de instalação - Página 5

Procurar online ou descarregar pdf Manual de instruções de instalação para Sistemas de E/S AB Quality ArmorPoint 1738-IB2M12. AB Quality ArmorPoint 1738-IB2M12 13 páginas.

Imprimir página

1. Troubleshoot with the Indicators

Install the Digital

Input Module

To install the digital input module:

1. Using a bladed screwdriver, rotate the keyswitch on the

mounting base clockwise until the number 1 aligns with the

notch in the base.

2. Position the module vertically above the mounting base. The

module will bridge two bases.

3. Push the module down until it engages the latching mechanism.

You will hear a clicking sound when the module is properly

engaged.

The locking mechanism will lock the module to the base.

Remove the Module From the Mounting Base

To remove the module from the mounting base:

1. Put a flat blade screwdriver into the slot of the orange latching

mechanism.

2. Push the screwdriver toward the module to disengage the latch.

The module will lift up off the base.

3. Pull the module off of the base.

ArmorPoint 24V dc Input Modules, Series A

Module will bridge two bases.

43772

Publication 1738-IN002B-EN-E - November 2004