AB Quality ArmorPoint 1738-IV8M23 Manual de instruções de instalação - Página 10

Procurar online ou descarregar pdf Manual de instruções de instalação para Sistemas de E/S AB Quality ArmorPoint 1738-IV8M23. AB Quality ArmorPoint 1738-IV8M23 13 páginas.

Imprimir página

1. Troubleshoot with the Indicators

ArmorPoint 24V dc Input Modules, Series A

ArmorPoint Digital Input Modules

Input Delay Time, ON to OFF

Input Point Density

Field Power Bus Supply

Voltage Range,

Nominal

Keyswitch Position

General Specifications

LED Indicators

PointBus Current, Maximum

Power Dissipation, Maximum

Thermal Dissipation, Maximum

Isolation Voltage

(continuous-voltage withstand rating)

Dimensions (includes I/O module

and mounting base)

Operating Temperature

Storage Temperature

Relative Humidity

Shock

Vibration

ESD Immunity

Radiated RF Immunity

EFT/B Immunity

Surge Transient Immunity

Conducted RF Immunity

Publication 1738-IN002B-EN-E - November 2004

0.5 ms hardware + (0-63 ms selectable

2, 4, or 8

10-28.8V dc

24V dc

2, 4, or 8 yellow input status, logic side

1 green/red network status, logic side

1 green/red module status, logic side

75 mA @ 5V dc

1738-IB2 - 0.7W @ 28.8V dc

1738-IB4 and -IV4 - 1.0W @ 28.8V dc

1738-IB8 and -IV8 - 1.6W @ 28.8V dc

1738-IB2 - 2.4 BTU/hr. @ 28.8V dc

1738-IB4 and -IV4 - 3.4 BTU/hr. @ 28.8V dc

1738-IB8 and -IV8 - 5.5 BTU/hr. @ 28.8V dc

50V rms

Tested at 1250V ac rms for 60s

Inches

4.72H x 2.83W x 1.65D

(Millimeters)

(120H x 72W x 42D)

IEC 60068-2-1 (Test Ad, Operating Cold),

IEC 60068-2-2 (Test Bd, Operating Dry Heat),

IEC 60068-2-14 (Test Nb, Operating Thermal Shock):

-20 to 60°C (-4 to 140°F)

IEC 60068-2-1 (Test Ab, Un-packaged Non-operating Cold),

IEC 60068-2-2 (Test Bb, Un-packaged Non-operating Dry Heat),

-40 to 85°C (-40 to 185°F)

IEC 60068-2-30 (Test Db, Un-packaged Non-operating Damp Heat):

5-95% non-condensing

IEC60068-2-27 (Test Ea, Unpackaged Shock):

Operating 30g

Non-operating 50g

IEC60068-2-6 (Test Fc, Operating):

5g @ 10-500Hz

IEC 61000-4-2:

6kV contact discharges

8kV air discharges

IEC 61000-4-3:

10V/m with 1kHz sine-wave 80%AM from 30MHz to 2000MHz

10V/m with 200Hz 50% Pulse 100%AM at 900Mhz

10V/m with 200Hz 50% Pulse 100%AM at 1890Mhz

IEC 61000-4-4:

±3kV at 5kHz on signal ports

IEC 61000-4-5:

±1kV line-line(DM) and ±2kV line-earth(CM) on signal ports

IEC 61000-4-6:

10Vrms with 1kHz sine-wave 80%AM from 150kHz to 80MHz

)