Avocent SwitchView DVI DH Series Manual de instalação rápida - Página 3
Procurar online ou descarregar pdf Manual de instalação rápida para Interruptor Avocent SwitchView DVI DH Series. Avocent SwitchView DVI DH Series 4 páginas.
Imprimir página
QUICK INSTALLATION GUIDE
Hotkey and front panel button reference sheet
NOTE: ACT keys are your defined activation keys. As a result, ACT1 + ACT2 means you should press your activation key twice in sequence. The default
activation key is Ctrl, meaning Ctrl + Ctrl is the default preceeding sequence for all hotkey commands.
COMMAND
Define Hotkey Preceding Sequence
Select PC Channel
(Joint select PC port, hub port, audio/mic
control if binding enabled)
Select Hub Port Control
Move USB Hub Port
Disable USB Hub Port
(To enable the USB port hub, use the USB
hub port control to select the desired port.)
Enable or Disable PC/USB Port Binding
Select PC for Local Port Audio
Next Lower PC Channel
(PC port control jointly controls PC and hub
port controls if binding is enabled. Using the
USB hub port control separately automatically
unbinds the USB hub session.)
Next Higher PC Channel
(PC port control jointly controls PC and hub
port controls if binding is enabled. Using the
USB hub port control separately automatically
unbinds the USB hub session.)
Previous PC Channel
Scan Interval Time
Interval Scan Begin
Stop Scan
Enable/Disable Mouse Movement to
Halt Scanning
Enable/Disable Double-Click Scan
Function
To Contact Avocent Technical Support: Visit www.avocent.com
Avocent, the Avocent logo, and SwitchView are registered trademarks of Avocent Corporation or its affiliates in the U.S. and other countries. All other marks are the property of their respective owners. ©2009 Avocent Corporation.
SwitchView DVI DH and DVI SH
HOTKEYS
ACT1 + ACT2 + H + (y) + Enter
y = Ctrl (1), Alt (2), Shift (3), PrntScrn (4)
ACT1 + ACT2 + (x) + Enter
x = 1 - 4 for PC channel number
ACT1 + ACT2 + Fx + Enter
x = 1 - 4
ACT1 + ACT2 + F9 + Enter
ACT1 + ACT2 + F10 + Enter
ACT1 + ACT2 + B + (x) + Enter
ACT1 + ACT2 + T + (x) + Enter
ACT1 + ACT2 + L + Down or
Left Arrow + Enter
ACT1 + ACT2 + L + Up or
Right Arrow + Enter
ACT1 + ACT2 + L + Backspace + Enter
ACT1 + ACT2 + S + (n) + Enter
ACT1 + ACT2 + S + G + Enter
ACT1 + ACT2 + S + H + Enter
ACT1 + ACT2 + S + M + (x) + Enter
ACT1 + ACT2 + S + S + (x) + Enter
Switch Series
FRONT PANEL BUTTONS & NOTES
N/A
Press the corresponding button to select the
active PC channel.
Press the corresponding button to select the
specific PC/USB hub port control if PC port/
hub port control binding is enabled.
N/A
N/A
x = + (Plus key)
x = - (Minus key)
x = 1 - 4
x = + (Plus key) Enables audio binding
x = - (Minus key) Disables audio binding
N/A
Press the PC button to toggle the PC
channel.
N/A
n = 2 - 60 (Seconds)
N/A
N/A
x = + (Plus key)
x = - (Minus key)
x = + (Plus key)
x = - (Minus key)
DESCRIPTION
Select the hotkey preceding sequence from
the following: Ctrl, Alt, Shift or PrntScrn.
Select the active PC channel (joint select PC
port/hub port control/audio and mic if binding
is enabled).
Select the PC channel that controls all USB
hub ports. This command automatically
disables PC/USB hub port binding.
Moves USB hub ports to currently selected
KVM session channel.
Disables USB hub ports.
Enables (Plus key) or disables (Minus key)
PC/USB port binding.
Selects active target PC for local port
signals. This command automatically disables
audio signal binding.
Select the next lower PC (joint select PC port
and hub port control if binding is enabled).
Select the next higher PC (joint select
PC port and hub port control if binding is
enabled).
Toggle between previous channel and
current channel.
Sets interval scan time. Default is 30 secs.
Starts interval scan function. This command
automatically disables PC/USB hub port
binding.
Terminate scan activity.
Enables (Plus key) mouse movement to halt
scanning or disables (Minus key) mouse
movement to halt scanning.
Enables (Plus key) double-clicking the mouse
wheel button to scan up to the next powered
target or disables (Minus key) this operation.
590-918-501B