Avocent SwitchView SC Manual do utilizador - Página 18
Procurar online ou descarregar pdf Manual do utilizador para Interruptor Avocent SwitchView SC. Avocent SwitchView SC 20 páginas. Kvm switching solutions from your desktop
Também para Avocent SwitchView SC: Especificações (4 páginas)
Imprimir página
SwitchView SC Installer/User Guide
B: Troubleshooting
Our Technical Support staff is ready to assist you with any installation or hardware
issues you encounter with your product. If an issue should develop, check the
Troubleshooting table below to see if the issue can be resolved by following the
procedures outlined, or call Avocent Technical Support at (888) 793-8763.
Symptom
Green channel LED not lit
Unable to switch channels
No video
Mouse jumps or "hugs" screen
Keyboard is inoperable on one
or more channels
Action
Verify unit is turned on. Check the cabling between your
computer and the SwitchView SC. Verify that a keyboard
works when plugged directly into your PC.
Verify that all attached PCs are powered and correctly
connected to the unit.
Verify that the video cable between the computer and the
SwitchView SC is connected to the selected port. Verify that
the monitor cable is correctly connected to the SwitchView
SC. Power down the computer, connect the monitor directly
to the computer, and then power up again. If the monitor
does not operate correctly direct to the computer, try
another monitor.
If the mouse has been hot-plugged while running in
Windows, you may need to close and restart Windows.
Verify that the cables from the computer to the
SwitchView SC are connected properly. Verify that the
mouse is plugged into the mouse port in the User
Console area on the rear panel of the unit. Verify that the
computer works properly with a mouse connected directly
to it. If not, try another mouse.
Verify that the cables from the PC to the SwitchView SC
are connected properly. Verify that the keyboard is plugged
into the keyboard port in the User Console area on the rear
panel of the unit.
12