Avocent HMX Manager Manual de instalação rápida
Procurar online ou descarregar pdf Manual de instalação rápida para Extensor Avocent HMX Manager. Avocent HMX Manager 2 páginas. Computer access to desktop over ip solutions
Também para Avocent HMX Manager: Especificações (4 páginas)
Imprimir página
The following instructions will help you
install and use your HMX Manager.
Should you require further assistance, see
the HMX Manager Installer/User Guide.
1
Installing the HMX Manager
Install the HMX Manager in a server rack or in
another appropriate location.
2
Connecting to your network
Connect one end of a CAT 5 cable to LAN Port
1 on the back panel of the HMX Manager and the
other to the LAN on which all managed units (IQs
and user stations) are connected.
NOTE: The HMX Manager may be connected to
two different networks using LAN Port 1 and LAN
Port 2 on the rear panel. LAN Port 1 must be used
to connect to the network where the IQ and user
stations are connected. LAN Port 2 may be used
to connect to another network. The administrator
may gain web browser access to the HMX
Manager from a computer that is connected to
networks on either of the LAN ports.
3
Connecting the power supply
Attach one end of the supplied power cord into
the back panel of the HMX Manager and attach the
other end to an appropriate AC power source.
WARNING: To reduce the risk of electric shock
or damage to your equipment:
- Do not disable the power cord grounding plug.
The grounding plug is an important safety
feature.
- Plug the power cord into a grounded (earthed)
outlet that is easily accessible at all times.
- Disconnect the power from the target device
by unplugging the power cord from either the
electrical outlet or the target device.
To Contact Avocent Technical Support: Visit www.avocent.com
Avocent, the Avocent logo, The Power of Being There, and Emerge, are trademarks or registered trademarks of Avocent Corporation or its affi liates. All other marks are the property of their respective owners. © 2007 Avocent Corporation. All rights reserved.
Quick Installation Guide
HMX Manager
To install the HMX Manager
4
Confi guring the IP address
To set an IP address to the HMX Manager, you must
establish a connection to the serial menu. You can then
use the options on the serial console menu to confi gure
the network settings for each of the LAN Ports on the
HMX Manager. For more information, see the HMX
Manager Installer/User Guide. You must use the serial port
to change the default IP settings on the HMX Manager.
5
Accessing the Web Interface
Open Microsoft® Internet Explorer and in the Address
bar, type the URL for the HMX Manager. The address will
be in the format http://<<addr>>, where <<addr>> is
the IP address assigned to the HMX Manager.
The Power of Being There
3
4
For example, using the default settings on LAN Port
1, the address is http://10.0.0.10. The login screen
appears. Log in using the administrator credentials
(If this is the fi rst login to the HMX Manager, use the
default login (admin) and default password (password).
NOTE: If DNS is enabled, the address is the fully
qualifi ed host name assigned to the HMX Manager.
®
5
2
Terminal or
Workstation
(for Confi guration)
590-818-501A