Avocent ACS 6000 Notas de lançamento - Página 3

Procurar online ou descarregar pdf Notas de lançamento para Hardware de rede Avocent ACS 6000. Avocent ACS 6000 5 páginas. Advanced console server
Também para Avocent ACS 6000: Notas de lançamento (4 páginas), Manual de instalação rápida (20 páginas), Notas de lançamento (5 páginas)

Imprimir página
Avocent ACS 6000 Notas de lançamento
o Event 507-- Sensor Alarm Cleared
o Event 508 -- Sensor Alarm High Critical
o Event 509 -- Sensor Alarm High Warning
o Event 510 -- Sensor Alarm Low Warning
o Event 511 -- Sensor Alarm Low Critical
o Event 512 -- Digital Sensor Alarm
9. SNMP – new Enterprise MIB to support data monitoring of a PDU that has meters.
o PDU Table (acsPowerMgmtPDUTable) – updated, it has new objects and old objects
marked as obsolete.
o Outlet Table (acsPowerMgmtOutElecMonTable) – new with data monitoring for each
outlet that has current meter.
o Phases Table (acsPowerMgmtPhasesTable) – new with data monitoring of each detected
phase.
o Banks Table (acsPowerMgmtBanksTable) – new with data monitoring of each detected
bank.
o Environmental Table (acsPowerMgmtEnvMonTable) – new with data monitoring for
each detected environmental sensor.
10. SU and SUDO commands are available in the shell prompt.
11. The java applet used by „Connect‟ is signed using a new Avocent Certificate.
12. Group authorization has new attribute: session idle timeout. If the group authorization that the
user belongs to does not have the session idle timeout configured, the appliance session idle
timeout will be applied for the session.
13. Support configuration via bootp request. The Bootp Configuration Retrieval option allows the
entire unit configuration to be retrieved over Bootp/TFTP during boot and during DHCP
renewal. There are two ways to push a configuration during a DHCP request/renewal. The
configuration can be sent as file created by the Save Configuration appliance system tool, or it
can be sent as a CLI script to be executed under the command line scripting interface.
14. Feature Alert Strings supports regular expression in the configuration of the string.
15. Multiple Routing Tables is supported. This feature allows customer to configure different
networks by built-in Ethernet interface (ETH0 and ETH1) and to have one default gateway for
each interface. This feature works only for IPv4 network and requires static configuration of the
IP address in both interfaces.
======================================================================
======================================================================
Bug fixes include:
Dial-in connection does not allow log-in to the appliance by passing callback requirement.
Appliance does not listen to TCP port configured as TCP port alias when the CAS protocol
is configured as SSH only.
NFS data buffering works fine after restore configuration (L3 65572984)
Bug Fixes