Avocent AMWorks Manual de procedimentos de instalação - Página 6
Procurar online ou descarregar pdf Manual de procedimentos de instalação para Software Avocent AMWorks. Avocent AMWorks 8 páginas. Multi-user, multi-platform switching for real-time data center and test lab environments
Também para Avocent AMWorks: Brochura e especificações (10 páginas), Brochura (8 páginas)
Imprimir página
2
AMWorks Installation Procedures
4.
Uninstall the existing AMWorks installation.
5.
Continue with the instructions provided above for installing AMWorks for
the first time.
To update from AMWorks 4.x.x.x (or later):
1.
Ensure that the correct database information is distributed across the
system by performing a Synchronize System Database command from
your existing installation. Use the AMWorks database as your
database source.
2.
When synchronization has completed, close your version of AMWorks.
3.
Place the install CD for your new version of AMWorks into your CD drive,
and select Setup.
4.
Follow the on-screen instructions: you may install the new version of
AMWorks over the old version, and you may choose to keep your existing
database intact.
5.
Proceed to the next section.
To complete the installation:
1.
After updating AMWorks, follow the instructions in Discovering Devices or
Adding Devices in the AMWorks Help. If AMWorks exists on the same
physical network and subnet as the AMX50xx devices, then you will only
need to perform a Discover Devices command, and all of your AMX50xx
devices will be automatically discovered. If they are not automatically
discovered, check that the config ID specified in the Network Settings
dialog box matches the config ID specified on all of your
AMX50xx devices.
2.
Perform a Synchronize System Database command on your newly
configured system.
a. Choose one of your AMX50xx devices as your database source.
b. Select the Overwrite option.
c. Click the Start button.
3.
Update the firmware on your AMX50xx devices, if you have not already
performed this operation. After updating firmware, proceed to step 4.
NOTE: Unless firmware updates are made to AMX50xx devices, synchronization of the system
databases will not be performed successfully.
4.
If you wish to set up user groups and server groups you may do so now.