Avocet ALTIMETER 50 Manual - Página 6

Procurar online ou descarregar pdf Manual para Acessórios para bicicletas Avocet ALTIMETER 50. Avocet ALTIMETER 50 6 páginas.

Imprimir página

Altimeter

Cable

Housing

Receiver Wire.

Secure the wire with ties or tape

starting at the receiver. Attach the wire only to parts that

rotate when the bicycle is steered–the fork, the handlebar

stem, or the front brake cable. Do not attach the wire to

the head tube. Wrap excess wire around the front brake

cable housing.

Cap

Battery

Batteries.

Install the batteries in their compartments

on the back of the Altimeter with their positive (+) sides

toward the caps. Press in the caps with your thumb. To

remove the batteries, pry the caps up with a screwdriver.

Note: Removing the batteries erases setup data. After

installing batteries complete the setup procedure. Warn-

ing: Use only Altimeter 50 batteries–see specifications.

A L T I M E T E R 5 0 S P E C I F I C A T I O N S

Dimensions: 2

" X 2

" X

Weight: 1

Display: Dual; UPPER NUMBERS

lower numbers

" high

Operational Temperature Range: 0° F to 150°F

Wheel Sizes: Calibration for wheels from 9.6" diameter

to 41.7" diameter in .04" increments

Data:

Altitude display updated every second when wheel is

turning or when a button has been pressed within the

last hour, every ten seconds otherwise

Speed display updated every second

Water Resistance: Waterproof

Batteries:

Two 1.5 v, 1.5–2 year life.

Use Avocet Altimeter 50 batteries or these equivalents–

Ray-O-Vac RW44, Duracell D386, Panasonic

SR43W, Eveready 386

I N S T A L L A T I O N

Mount Bracket.

the mount bracket on the handlebar near the right side of

the stem. Insert the clamp screw and tighten it until the

bracket does not move when the Altimeter is inserted or

removed. Small diameter handlebars may require taping

beneath the clamp for a tight fit.

I N S T A L L A T I O N

Altimeter 50 Installation.

the mount bracket from front to rear until it snaps on.

Advance the Altimeter to the speed function. Spin the

front wheel and watch for a speed reading. If the display

remains at zero, check the wire connection plugs at the

receiver, and make sure that the receiver and transmitter

are aligned and nearly touching.

Altitude Functions:

CURRENT ALTITUDE: -990 ft to +19,990 ft in 10 ft

" high,

increments, adjustable for barometric change

Trip Climb/Descent: To 19,990 ft in 10 ft increments

(accumulated only while wheel is turning)

Total Climb/Descent: To 1,999,900 ft in 100 ft

increments (accumulated only while wheel is turning)

Speed Functions:

CURRENT SPEED: To 128 MPH in .5 MPH increments

Average Speed: To 128 MPH in .1 MPH increments

(calculated only while wheel is turning; averages up

to 290 hrs without resetting)

Maximum Speed: To 128 MPH in .5 MPH increments

Cadence: 15 to 240 crank RPM (requires kit)

Distance Functions:

TRIP DISTANCE: To 1,999.9 mi in .1 mi increments

Total Distance: To 19,999 in 1 mi increments

Time Functions:

STOPWATCH: Elapsed time to 1:59:59

Clock: 12 hour

Mount Bracket

Remove the clamp screw and place

Slide the Altimeter into