DFE TrueView 1100 Manual de instruções - Página 8
Procurar online ou descarregar pdf Manual de instruções para Instrumentos de medição DFE TrueView 1100. DFE TrueView 1100 14 páginas. Tension indicator
Imprimir página
3
OPERATION
3.1 MENU DISPLAY AND NAVIGATION
The first screen that will appear upon powering up will be
the one in Fig. 1 reminding you that setup must be
performed before operating the unit.
From the tension display screen (Fig. 2), the Menu button
will deliver the operator to the Main Menu (Fig. 3) where
subordinate menus appear for further navigation. Note that
the names of all menu screens are consistently displayed
at the center of the top line.
1. Operator Menu
submenu are accessed through the operator menu. The
display configuration page (Fig. 3b) reveals the following
options:
Tension Update -
seconds and press SAVE to adjust the time it takes for
the display to update with new information. Longer
updates produce fewer changes in displayed
information over time, at the expense of rapid visual
response to changes in tension.
Plot Update Time -
30 min and press SAVE to adjust time that tension
displays before dropping off the trend-line graph
screen .
Meter Damping
display meter to balance response speed vs read-out
stability. Select your preferred value and press SAVE.
Display Brightness -
100% and press SAVE.
2. Diagnostics
Tech Support if needed.
3. Calibration Menu and Service Access
When selecting either of these menus, a screen
(Fig. 4) requiring permission-based access will display.
Touch Request Access and enter Code 6 1 5 0. You will
see the Access Enabled screen and will be directed back
to the menu where the Calibration and Service Access
will now be available for selection.
- The Display Configuration tab and
Choose 0.2, 0.5, 1.0, 2.0 or 5.0
Choose 30 sec or 1, 2, 5, 10 or
- Changes the update rate of the
Adjust between 10% and
-
This menu is for discussions with DFE
Figure 1 - INITIAL POWER-ON SCREEN
Figure 2 - TENSION DISPLAY SCREEN
Figure 3 - MAIN MENU
Figure 3b - DISPLAY CONFIGURATION
Figure 4 - REQUEST ACCESS SCREEN
4