DFG ETitanWire Manual de instruções - Página 4
Procurar online ou descarregar pdf Manual de instruções para Máquina de encadernação DFG ETitanWire. DFG ETitanWire 5 páginas. Heavy duty binding machine
Imprimir páginaDetermine Side Margin (side guide) and Punch Margin (back gauge)
Punching
1. Align sheets and insert edge to be bound into punch throat
2. Push the sheets flush against the inner back wall of the punch throat
3. Slide the sheets leftward, against the side guide
4. Pull the punch handle to punch
You can punch up to 25 sheets of paper (20 lb. paper) at once.
Most people punch between 12 and 20 sheets at a time.
Binding
1260 Kempar, Madison Heights, MI 48071, U.S.A. Phone: 248-733-0400, Fax: 775-587-5352
Email: [email protected] Website: www.dfgus.com
Set closing mechanism measurements, test wire closure, and
adjust to satisfactory close.
Put punched sheets together into a complete book (also take
out the bottom page and place it on the top- see below) with
punched edge facing you. Prepare a wire element.
1. Select the punch margin (general
guideline: the thicker the book, the
larger the ideal punch margin.
However, you can use small punch
margins for any book thickness)
2. Set side guide to center the sheet