Aqua Medic Turboflotor multi SL Manuais de operação - Página 5

Procurar online ou descarregar pdf Manuais de operação para Aquários Aqua Medic Turboflotor multi SL. Aqua Medic Turboflotor multi SL 8 páginas.

Fig.4: Turboflotor multi SL, Hang on, tilted at 5º

The skimmer is now ready for use and can be started.

Set up: beside or inside the filter tank of a sump or under tank filter system

The Turboflotor multi SL can also be used in a sump or under tank filter system. It

can be placed either in- or outside the filter.

See the above hang-on procedures for installing the skimmer on the outside of the

filter tank. It is attached to the frame of the filter tank. If the filter tank is not high

enough, the skimmer is placed beside the tank. For the return flow, outflow boxes

may be used. If the water level in the filter tank is very low, or there is a shortage of

space in the tank, two 90°-elbow fittings may be connected to the outlets (7) and the

water will then directed down to the water surface in the tank. This avoids splashing

and reduces noise. The venturi pump is fixed inside the filter tank, in such a way, that

it will not run dry and that the length of the pressure tube be kept as short as possible

(fig.4). The pump should be placed close to the water surface. To prevent the pump

running dry, we recommend using an automatic level controller (e.g. ab-aquaniveau

single) to ensure replacement of evaporated water and to keep the water level in the

filter constant.