Aqua One 1250-R Manual de instruções - Página 9
Procurar online ou descarregar pdf Manual de instruções para Produtos para animais de estimação Aqua One 1250-R. Aqua One 1250-R 17 páginas. Reptile canister filter
Installation
21. Repeat steps 19 to 22 for the outlet.
22. Place the suction caps on the spray bar or
duck bill then attach it to the back or side of the
terrarium. Fig 11
23. You are now ready to start your filter.
Starting Your Filter
METHOD 1
NOTE: Your terrarium must be filled with water
to prime your filter. Ensure both taps are in the
on position by shifting the plastic lever from the
OFF (Horizontal position) to the ON (Vertical
position). NOTE: Once the filter is running,
double check the fittings and seals for water
tightness. Fig 1
On
Fig 10
Fig 11
Off
Fig 1
1. The Primmer for your canister filter is located
at the top of the head unit. Fig 2
2. Press the primmer down either with your
thumb or your palm Fig 3
3. Depress all the way then release. Fig 4.
Continue to pump the primer until the water
flows down the inlet tube and begins to fill the
canister.
4. Stop pumping and allow the canister to fill
with water.
5. The filter is primed when the intake pipe and
canister are completely filled and the water
starts to travel up the outlet tube.
Fig 2
Fig 3
Fig 4