CP Electronics Vitesse Plus Início rápido - Página 2

Procurar online ou descarregar pdf Início rápido para Sistemas de controlo CP Electronics Vitesse Plus. CP Electronics Vitesse Plus 3 páginas.

Imprimir página
Use the following procedure with the UNLCDHS handset to get your Vitesse Plus installation up and running:
1
Connect the power to the LCM. It then goes through a
power-up sequence of 8 seconds, after which all
connected lights switch on.
3
Select
from
Vitesse Plus
the main
PRODUCT FAMILY
menu and press
.
5
Select
and press
Program
or
.
7
Point the handset directly at
the device and press
. An LED flashes
red/green to acknowledge
the command, then green till
the preset is programmed.
PRODUCT FAMILY
Rapid
Vitesse Plus
à
Handset Config
LCM
à Program
Lux Settings
Device Info
2
Press
to turn on the programming handset.
ON/OFF
4
>
Select
and press
>
LCM
>
or
.
6
>
Select
and type in
Preset
>
the number of the preset.
>
8
Press
twice to return to
the
menu.
Vitesse Plus
VITESSE PLUS
à LCM
Detector
Scene Panel
PROGRAM
à Preset
Load Type
DALI
Detection
Pres
Mode
VITESSE PLUS
LCM
à
Detector
Scene Panel
>
>
>
7
>
>
>