Billi B-4000 Manual do utilizador - Página 8

Procurar online ou descarregar pdf Manual do utilizador para Sistema de água Billi B-4000. Billi B-4000 13 páginas. Instant boiling and ambient filtered water system
Também para Billi B-4000: Manual de instalação (8 páginas)

Imprimir página
User guide
B–4000.

Options

Operating modes can be selected by the user
by entering Options Mode.
Within the Options Mode, you can set the safety
switch through the hot water lever and power
save mode through the ambient water lever.

–To enter Options Mode

1. Turn on the unit and wait for normal
operation (icons are both illuminated
constantly).
2. Push both the Hot and Ambient levers down
and while holding the two levers down
press the safety switch (located at the
back of the tap). Hold both levers and
safety switch for 3 seconds.
3. Icons will flash yellow.
4. Release both the levers and safety switch.
5. Unit is now in options mode.
6. If you wish to change or set the safety switch
mode, follow the safety switch settings
procedure below. If you wish to change or
activate the power saving mode follow the
power save mode settings procedure below.
8

—Safety switch settings

The
Red
icon indicates the different safety
settings enabled. To change or activate
a setting, press and release the hot lever
to scroll through the following options:
– Off indicates the hot tap is disabled.
– Blinking indicates the safety switch is
enabled.
– On indicates normal operation with safety
switch not enabled.
To save new setting and exit Options Mode,
press the safety switch and release. Wait 10
seconds for unit to return to normal operation.

—Power save mode settings

The
Blue
icon indicates the power save level
that is selected. To change or activate a setting
press and release the ambient lever to scroll
through the following options:
– Off has no function
– Blinking indicates standby mode is enabled.
– On indicates system in 24 hour continuous
mode.
To save new setting and exit Options Mode,
press the safety switch and release. Wait 10
seconds for unit to return to normal operation.