CP Plus CP-VTA-M1143 Manual do utilizador - Página 2

Procurar online ou descarregar pdf Manual do utilizador para Hardware de rede CP Plus CP-VTA-M1143. CP Plus CP-VTA-M1143 9 páginas.

Fingerprint and facial time attendance machine

Dear customers,

Thanks for using this attendance product from our company. Before using it, please

read the manual carefully, because it can improve your

● Using Environment

1. Please don't leave the machine in the light shine, because the light shine has

impact on fingerprint, it may lead to fail to verify the fingerprint.

2. The facial

identification module used special technology, the facial can be

verified whether the light is dark or

3. The working temperature of the time attendance device is 0-45℃. Please do

not used in outdoors, because long time working in outdoors will have bad influence

on the device. If the device is used in outdoors, it is important to use sun shade and

radiating equipment to protect it in summer, and in winter it is important to use heat

preservation facilities.

● Installation machine step

Time attendance machine need to hang on the wall. While installation please check

the following step:

1. Fixed the position: Use the

to find out the screw hole.

2. Make hole: Use tool and follow the position to drill a suitable screw hole.

3. Hung the metal plate: Put the metal plate into the right place, then put the screws

into the hole and tightly fixed it.

4. Hang the machine: Hang the device on the metal plate directly and tighten the

screws on the machine. (Distance from machine and the floor about 1.4 meters).

5. Booting machine: Power on machine and booting it.

● Attention to register fingerprint

1. After install machine, first user needs to register their fingerprint on the machine,

we advise user use index finger and middle finger. And please try to put the finger

in the middle of the fingerprint scanner.

2. User need to choose good fingerprint when register. These fingers are

better, such as less wrinkle, no peel, clear fingerprint and immaculate.

3.When user verify fingerprint, please put the finger flat and slightly on the

scanner of the device, and make sure the finger is in the sensing area, wait

User guide

bright.

metal plate behind the machine or the position paper

2 / 9

use efficiency. Thanks!