Aqua One Battery Air 250 Manual de início rápido - Página 2
Procurar online ou descarregar pdf Manual de início rápido para Bomba de água Aqua One Battery Air 250. Aqua One Battery Air 250 2 páginas.
Imprimir página
Step By Step Guide
1. Remove the pump from the
plastic bag
5. Install 2 x D batteries. Make
certain they are in the right way
9. Where possible place the
pump above the aquarium or
bucket
Aqua One Battery Air Pump Guarantee
Diaphrams, Flapper Valves, Air Stones, Outer casing & Batteries
(not included).
2. Using your thumb depress
the side wall of the pump
6. Close the pump, it should
"click"
10. If this is not possible then
ensure that an Aqua One check
valve is fitted to the airline,
failure to do so will damage your
air pump & void your warranty
3. Open the lid
7. Remove the airline and
airstone from the plasticbag.
Plug the airstone into one end
of the airline
11. Flick the switch to the "on"
position to operate the pump.
Precision Manufactured in the P.R.C.
Designed in Australia by Aqua One
Distributed in Australia by:
Kong's (Aust.) Pty. Limited
48 Williamson Rd. Ingleburn
2565 NSW Australia
Distributed in New Zealand by:
Kong's (NZ) Limited
52 Glenlyon Avenue, Greerton
Tauranga New Zealand
Distributed in Hong Kong by:
Kong's Aquarium Supplies Co., Ltd
No 31, 3/F Thriving Industrial Centre
26-38 Sha Tsui Road, Tsuen Wan,
Hong Kong
Distributed in the UK by:
Kong's (UK) Limited,
C/O Aqua Pacific UK Ltd.
PO Box 268
Romsey Hampshire
SO51 0WW
United Kingdom
www.aquaone.com.au
® Aqua One and Kong's are registered trademarks.
4. Take out the accessory pack
8. Plug the other end of the
airline into the outlet of the pump