Aqua One moray 2300 Manual - Página 8

Procurar online ou descarregar pdf Manual para Bomba de água Aqua One moray 2300. Aqua One moray 2300 12 páginas. Aquarium pumps
Também para Aqua One moray 2300: Manual do utilizador (12 páginas)

Imprimir página

Installation: 360/480/1300

The 360, 480 or 1300 series Morays can be mounted in

2 different ways and used for a variety of applications.

All 3 models come with uplift pipe adapters enabling

them to be used as an alternative to air driven systems

on under gravel filters. Refer to the "know your pump"

section at the front of this instruction booklet for part

identification.

Attaching the hang bracket: 380/480 series

1. Remove the top motor cover and the strainer.

2. Remove the 4 suction cups.

3. Insert the hang mount into the 2 holes at the strainer

end of the motor

4. Place the top motor cover and the strainer (If being

used) back into position.

Attaching the hang bracket: 1300 series

1. Remove the strainer and slide the base plate

out towards the impeller.

2. Slide the hang mount into the groves at the

back of the pump.

3. Replace the strainer. (If being used)

They are also provided with multiple outlet options.

water level

1. Duckbill or multi directional outlet: allows the water

to be channelled a variety of different directions. Good

for providing water flow to static areas of the aquarium,

thus reducing waste build up.

2. Venturi: for injecting bubbles into the aquarium.

The venturi adjuster allows the water to air ratio to be

adjusted by the user.

3. A 19mm barbed hose tail is also provided with the

1300 series pump. This can be used for running devices

such as protein skimmers. 2300, 3600 and 4900 series

pumps are dedicated sump pumps. They are provided

with 19mm and 25m barbed hose tails. They can be

used for many other purposes such as running external

filtration devices or simply circulating water.