AVPro Edge ConferX AC-CX84-AUHD Manual de início rápido - Página 3
Procurar online ou descarregar pdf Manual de início rápido para Comutador de matriz AVPro Edge ConferX AC-CX84-AUHD. AVPro Edge ConferX AC-CX84-AUHD 6 páginas. 8 input, 4 output hdmi classroom/conference room matrix switcher
Imprimir páginaAudio Matrix
Once the switch is set to Matrix audio mode, audio signals can be routed however you'd like. To
control the Audio Matrix from the front panel:
1. Press and hold the BYPASS button for 3 seconds
2. The UP and DOWN buttons will illuminate. Press either one until you locate "Matrix" mode.
3. Quick press the BYPASS button
4. Press the desired OUTPUT button (where you would like the audio to go)
5. Press the desired INPUT button (the source that you would like audio from)
6. Press the BYPASS button to exit the Audio Matrix
Audio Delay
Are the person's lips out of sync with the person's voice? If so, there may be an audio delay issue.
Luckily, the AC-CX84-AUHD has a built-in audio delay setting that will help.
Audio Delay is set on the extracted audio OUTPUT (both Toslink and analog audio) of the switch. Each
can have its own setting. Audio Delay has 4 controls:
1. UP (increases delay)
2. DOWN (decreases delay)
3. MUTE (audio is muted)
4. BYPASS (no delay)
To control Audio Delay:
1. Press and hold the OUTPUT button for the display that you would like to delay the audio
2. The UP, DOWN, MUTE, and BYPASS buttons will illuminate, indicating that the switch is ready for
you to make a selection
3. Press either UP, DOWN, MUTE, or BYPASS depending on what you would like to do
*NOTE - The Audio Delay can be set anywhere from 90ms to 630ms in increments of 90m
EDID Management:
The AC-CX84-AUHD has 29 factory defined EDID settings as well as 3 user memories. You can also
choose to read the EDID from any OUTPUT. By default, the Matrix Switch is set to a 1080p EDID for
maximum plug and play capability. If you are using 4k/UHD sources you will need to define a 4k/UHD