DFI EC910-8MM Manual de instalação rápida - Página 7
Procurar online ou descarregar pdf Manual de instalação rápida para Hardware informático DFI EC910-8MM. DFI EC910-8MM 16 páginas. Nxp i.mx8m mini processor ruggedized fanless embedded system
Também para DFI EC910-8MM: Manual do utilizador (15 páginas)
Imprimir páginaInstalling an M.2 Card
Please follow the steps below to install the card into the socket.
M.2 Module
M.2 Socket
M.2 Module
M.2 Socket
Stand-off
M.2 Sockets
Notch
Key
Stand-off
Notch
Key
M.2 Module
M.2 Socket
Step 1:
Insert the card into the socket at an angle while making sure the notch and key
are perfectly aligned.
Stand-off
Notch
Key
M.2 Module
M.2 Socket
Stand-off
Notch
Key
Step 2:
Press the end of the card far from the socket down until against the stand-off.
Step 3:
Screw tight the card onto the stand-off with a screw driver and a stand-off screw
until the gap between the card and the stand-off closes up. The card should be
lying parallel to the board when it's correctly mounted.
Quick Reference | EC900-8MM / EC910-8MM
7