Allied Telesis AT-9424T AC Nota de lançamento - Página 3
Procurar online ou descarregar pdf Nota de lançamento para Interruptor Allied Telesis AT-9424T AC. Allied Telesis AT-9424T AC 14 páginas. 24 port 10/100/1000t standalone managed layer 3 switch
Também para Allied Telesis AT-9424T AC: Ficha de dados (3 páginas), Ficha de dados (3 páginas), Ficha de dados (3 páginas)
Imprimir página
Stacking Features supported in Version 3.1.0 Patch 1
The following features are supported across a stack
Port statistics
Port configurations
Remote Telnet management
Event log
Spanning tree protocol (STP)
Port-based and tagged VLANs
All other features in the AT-S63 Management Software are automatically deactivated when a
stack is powered on.
Stacking Configuration Tips
When stacking more than two switches, use the AT-9424Ts or AT-9424Ts/XP as the master
and backup master switches.
When adding a member switch to a stack, add one switch at a time. Ensure that the stack is
up and stable before adding another member switch.
All ports are disabled during stack discovery. This means that each time you add or remove a
switch from the stack, switching is suspended across all ports until the discovery process is
complete.
Remember that there are different configuration files for the standalone configuration and the
stacking configuration. Be sure to create your desired configuration on both images in case
there is a stack failure.
Table sizes do NOT increase in Stack mode. The table sizes in a stack are:
— 16k MAC Addresses
— 2k ARP Entries
— 4094 VLANs
A stack can have up to four 48-port AT-9448Ts/XP Switches and two 24-port AT-9424Ts / AT-
9424Ts/XP (Master) or eight 24-port AT-9424Ts / AT-9424Ts/XP Switches.
PN 613-000915 Rev A
AT-S63 Version 3.1.0 Patch 1 Software Release Notes
3
Allied Telesis, Inc.