Aqua Select 832406SC Manual - Página 6

Procurar online ou descarregar pdf Manual para Escadas Aqua Select 832406SC. Aqua Select 832406SC 8 páginas. Heavy duty resin in-pool ladders with entrapment barrier

Imprimir página

Coat adjustable tube (AC ADJTUBE) with lubricant and slip

•

(1) mounting block (AC MTBLOCK) all the way down over the nubs on the tube.

The open side should be exposed.

•

Repeat for second adjustable tube and mounting block.

Push one adjustable tube into the longer part of each handrail. The mounting block

•

should sit on the top step to hold the ladder in place. Secure into handrail using

(4) #10 1-1/4" screws in pre-marked openings.

•

Move tube down to deck until it rests on the deck. Using the proper hardware

(not included) screw mounting blocks into decking through the pre-drilled holes.

STEP 8 —

•

If attaching to a Deck proceed to STEP 7

NOTE

•

If attaching to a Step to create the Aqua Select

System proceed to STEP 8

STEP 7—DECK MOUNT

AQUA SELECT® EVEREST ENTRY SYSTEM

STEP 9

• Once shields are situated properly, lift ladder

up and line up the openings of shield with long

handrail posts of the step.

• Slide the ladder down until it rests on ground

outside.

• To attach the ladder to the step assembly,

you will need to attach the shield (AC SHIELD).

• Line the shield up above the handrail and push

it down so it slides onto the handrail.

Repeat for opposite side.

• Rotate shield 90 degrees, so that the open

sleeve of each shield is on the outside

(see photo).

Everest Entry