DFI KS070-AL Manual de instalação - Página 5

Procurar online ou descarregar pdf Manual de instalação para Painel tátil DFI KS070-AL. DFI KS070-AL 12 páginas. 7 inch touch panel pc
Também para DFI KS070-AL: Manual de instalação (19 páginas), Manual de instalação (12 páginas)

Imprimir página

Installing an M.2 Card

The system is equipped with one M.2 socket, supporting the M.2 22x42mm

(key B) form factor. Use the following procedure to install an M.2 card:

1. Align the notch at the edge of the M.2 card with the key in the connector.

2. Insert the M.2 card into the connector.

3. Push down on the other end of the M.2 card and secure and card on the

mainboard with the provided mounting screw.

Note:

The M.2 socket supports PCIe, USB, and SATA signals and can accommodate common

mobile broadband and storage modules. For jumper settings on switching the signal

betwen SATA and PCIe, refer to "Board Layout and Jumper Settings."

Mounting screw

M.2 card