AVS SCOPE212WIR3 Manual do utilizador - Página 2

Procurar online ou descarregar pdf Manual do utilizador para Câmara de segurança AVS SCOPE212WIR3. AVS SCOPE212WIR3 2 páginas. 3 mega pixel hd network ir dome camera

Imprimir página
6. Web Viewer
You can connect the web server inside the camera and check the picture.
First enter the address on internet explorer.
1) Enter ID / Password
2) Click Viewer
1)
ID
admin
2)
Password
Install Active-X
3)
4)
8. Web Viewer
Suppress rolling
If there is a rolling picture under lighting, you can use this Suppress rolling function.
If you choose "Strong" on Suppress Rolling function, electric shutter will be xed at
1/15 ~ 1/120 sec. you should be careful when you use it under bright lighting.
Click Help (
) for more details.
1)
Shutter Speed
Auto
3)
Suppress Rolling(60Hz)
weak
strong
2)
User
Shutter Speed 1/60
AGC
(-)
(+)
(2)
4)
5)
Web viewer functions
1) Stream : Choosing stream, displaying the status of chosen stream
2) Viewer Size : Choose the size of window
3) Disconnect : Disconnect the camera
4) Save : Record the current moving picture in AVI le format.
5) Capture : Save the current still picture in BMP le format.
6) Path : Choose the directory to Save, Capture
7) Audio On : Turn On/O Audio
Audio should be On at setting.
9. Web Manager
Frame rate / Bit rate adjustment
Refer to below bit rate and frame rate example for your easier understanding.
Current Status
Frame Rate : 30[fps]
Bit Rate
: 4000[Kbps]
Case 1
Frame Rate 15[fps]
Bit Rate
4000[Kbps]
The pictures transferred per 1 sec. is decreased from 30 to 15.
The date size transferred per 1 sec. is maintained on 4000[Kbps]
Picture quality will be better, and network load will be same.
Case 2
Frame Rate 30[fps]
Bit Rate
2000[Kbps]
The pictures transferred per 1 sec. is maintained on 30.
The date size transferred per 1 sec. is decreased from 4000[Kbps] to 2000.
Picture quality will be worse and network load will be decreased from
4000[Kbps] to 2000, by half.
7. Web Manager
You can control all the functions through Web Manager log on.
When you use, you should change ID and Password and don't open for secure use.
1) Enter ID / Password
2) Click Manager
1)
ID
admin
2)
Password
Check the network setting and change
When it is working ne under LAN condition, but not working under WAN,
and the camera cannot receive the correct time from NTP server,
1)
IP Address
Assigned IP
192.168.1.30
2)
MAC
40:04:0C:01:00:AA
Dynamic(DHCP)
3)
Static
IP Address
192.168.1.30
Subnetmask
255.255.255.0
Gateway
192.168.1.1
4)
DNS
5)
1'st DNS
168.126.63.1
2'nd DNS
6)
Case 3
Frame Rate 15[fps]
Bit Rate
2000[Kbps]
The pictures transferred per 1 sec. is decreased from 30 to 15.
The date size transferred per 1 sec. is decreased from 4000[Kbps] to 2000.
Picture quality is same, network load will be decreased from 4000[Kbps] to
2000, by half.
Therefore you should change both frame rate and bit rate.
1)
2)
Image Mirror
Normal
Resolution
Input 1
1280x1024
Input 2
640x480
Stream Setting
3)
Stream
Source
Codec
show / hide
Stream 1
Input
H.264
Frame Rate(fps)
30
(1~15)
Key Frame
30
(5~30)[15]
Bit Rate(Kbps)
4000
(64~12000)[8000]
Rate Mode
VBR
Stream 2
None
MJPEG
Frame rate(fps)
5
(1~15)
Quality
50
(5~80)[50]
Stream 3
None
MPEG4
Frame Rate(fps)
15
(1~15)
Key Frame
30
(5~30)[15]
Bit Rate(Kbps)
4000
(64~12000)[8000]
Rate Mode
VBR
( ) : Value Range [ ] : Default Value
Save
How to update the rmware
Update is needed to improve the functions and quality.
1) Click the nd and choose the update le.
2) Click Update start and wait until Wait Downloading appears.
* Don't click any buttons when you are waiting.
1)
2)
3)
4)
3) Wait until Update completed
* Don't click any buttons when it is being updated.
4) After Update completed, click Restart
How to set WDR
If you want to watch the more clear image under back light condition,
you can do setting as below, and choose the step and click Save.
* You should check the pictures after click the Save button.
1)
WDR
3)
Enable
2)
Ligth Compensation
Back-light
Front-light
4)
WDR
Step 1
Step 2
Step 3
Step 4
Step 5
5)
Save