CPG 351SRCPG12NL Manual do utilizador - Página 8

Procurar online ou descarregar pdf Manual do utilizador para Gamas CPG 351SRCPG12NL. CPG 351SRCPG12NL 9 páginas. Countertop step-up ranges

User Manual

351SRCPG12NL | 351SRCPG24NL | 351SRCPG36NL

LIGHTING INSTRUCTIONS

LIGHTING PILOT

NOTE: The pilot light on the appliance has been set at the factory. A screwdriver may be required for the

first lighting to adjust the flame for your elevation.

1 . Turn off the manual valve and wait 5 minutes to clear the gas.

2 . Turn all knobs to the "OFF" position.

3 . Hold an ignition source (match) at the pilot.

4 . When the flame is established, remove the ignition source.

5 . Turn the burner knobs to "ON". If the burner does not ignite, promptly open the pilot valve more.

If the pilot flame appears larger than necessary, turn it down and reset burner ignition. The pilot

flame should be as small as possible but large enough to guarantee reliable ignition of the burners

when the knobs are turned to "ON".

LIGHTING MAIN BURNER

1 . To light burner, turn knob to "ON."

2 . Then turn to the desired flame level.

NOTE: The range of adjustment is virtually infinite between "ON" and "OFF".

MAIN BURNER AIR SUPPLY

NOTE: For efficient burner operation, a proper balance of gas volume and primary air supply must be

maintained which will result in complete combustion. Insufficient air supply results in a yellow streaming

flame. Primary air supply is controlled by an air shutter on the front of the burner.

1 . Loosen the screws on the front of the burner and adjust the air shutter to eliminate the yellow tips

of the burner flame.

2 . Lock the air shutter in place by tightening the screws.