CPG 351FFOP40N Manual de serviço - Página 4

Procurar online ou descarregar pdf Manual de serviço para Fritadeira CPG 351FFOP40N. CPG 351FFOP40N 13 páginas. Open pot fryers
Também para CPG 351FFOP40N: Manual do utilizador (16 páginas)

Imprimir página

Service Manual

351FFOP40N, 351FFOP50N, 351FFOP40L, 351FFOP50L

Part Testing

CAUTION: Components Can Be Hot

Follow these pre-maintenance steps before servicing

your Cooking Performance Group Floor Fryer

PRE-MAINTENANCE:

Turn thermostat to the "OFF"

position (Fig. 1)

Turn knob, on combination gas valve,

to the "OFF" position, align with

"RED" dot (Fig. 2)

Turn off gas supply to unit (Fig. 3)

(Supplied by others)

Allow unit to cool as needed

GAS COMBINATION VALVE:

•

Thermopile voltage with pilot light on

= 250 - 750 millivolts DC with thermostat

in "OFF" position (Fig. 4)

•

If too low, adjust pilot light flame strength,

see below

•

Knob in "ON" position, Thermostat in "ON"

position, coil voltage should be higher than

120 millivolts

•

If the coil voltage is below 120 millivolts DC,

replace combination valve

GAS COMBINATION VALVE

ADJUSTMENTS:

Adjusting Pilot Light Strength

Remove screw cap covering pilot adjustment

screw, located next to the pilot light gas hose,

with a flat head screwdriver (Fig. 5)

With a small flat head screwdriver, turn the

adjusting screw to increase or decrease pilot

light strength as needed

Counterclockwise = Increase

Clockwise = Decrease

Reinstall cover cap when correct strength has

been reached

Pilot light strength check

Pilot light should have a minimum

millivolt reading of 250, 500 or more is

recommended (Fig. 6)

FIG. 1

FIG. 3

FIG. 5

FIG. 2

FIG. 4

FIG. 6