Allied Telesis Rapier AR 700 Series Como fazer - Página 4

Procurar online ou descarregar pdf Como fazer para Interruptor Allied Telesis Rapier AR 700 Series. Allied Telesis Rapier AR 700 Series 8 páginas. How to set up pppoe between a linux client and access concentrator
Também para Allied Telesis Rapier AR 700 Series: Como configurar (6 páginas), Manual de resolução de problemas (8 páginas), Resolução de problemas (5 páginas), Manual de instalação rápida (13 páginas)

Imprimir página

Allied Telesis Rapier AR 700 Series Como fazer

Starting the Link

[root@linux_client michael]# pppd pty 'pppoe -I eth1'

Loading PPP modules for linux kernel 2.4:

[root@linux_client michael]# ping 192.168.0.254

PING 192.168.0.254 (192.168.0.254) from 192.168.0.1 : 56(84) bytes of

64 bytes from 192.168.0.254: icmp_seq=0 ttl=64 time=357 usec

64 bytes from 192.168.0.254: icmp_seq=1 ttl=64 time=266 usec

64 bytes from 192.168.0.254: icmp_seq=2 ttl=64 time=256 usec

--- 192.168.0.254 ping statistics ---

3 packets transmitted, 3 packets received, 0% packet loss

round-trip min/avg/max/mdev = 0.256/0.293/0.357/0.045 ms

pppoe is actually another PPP daemon and we tell it to start pppoe discovery out eth1. The "pty"

part makes pppd converse via a pseudo terminal, otherwise all the PPP output goes to the screen

and hence the link will not come up.

Set Up PPPoE Between a Linux Client and an Allied Telesis Access Concentrator

To configure your linux device, start the pppd (PPP daemon) process and tell it to start

pppoe

data.

[

]