Avsl 953.093UK Manual do utilizador - Página 3

Procurar online ou descarregar pdf Manual do utilizador para Amplificador Avsl 953.093UK. Avsl 953.093UK 4 páginas. In-wall bluetooth amplifier

Connections

Installation

Locate the IW60B in the ceiling, wall or on the surface required. Tabs at each end of the

housing can be used for securing with screws.

Connect speakers using the supplied wires or equivalent by connecting "+" and "-" on the

speaker to the relevant connection on the IW60B. The speaker connections are via screw

terminals on a Euroblock, which can be removed for easy access whilst making connections.

Important:

Ensure that the load is no lower than 4Ω for each output.

(e.g. 2 x 4Ω speakers... or... 2 pairs of 8Ω speakers wired in parallel)

Ensure that the speakers can handle 30W from each output.

If the IW60B is to be used with a wired audio line level input (instead of Bluetooth), connect

this to the Euroblock terminals labelled "AUX IN" as shown on the Connections diagram

above.

Left positive connection (Left+) should be connected to "L"

Right positive connection (Right+) should be connected to "R"

Both negative connections (Left- and Right-) should be connected to "G"

(G is the terminal for Ground connection – common for both Left and Right signals)

Likewise, the Bluetooth or Aux input can be relayed to further IW60B or other amplifiers by

connecting a line level output from the Euroblock terminals labelled "AUX OUT"

AUX IN and AUX OUT connections should be made using shielded stereo audio cable and

not speaker cable.

953.093UK User Manual