DG USB3D-IP Manual - Página 8

Procurar online ou descarregar pdf Manual para Placa-mãe DG USB3D-IP. DG USB3D-IP 16 páginas. Usb3.0 device function ip-core

dg_usb3.0_dev_ip_demo_instruction_en.doc

2 2 2 2 - - - - 2 2 2 2 Xilinx

Xilinx E E E E valuation Procedure

valuation Procedure

Xilinx

valuation Procedure

For Xilinx USB3.0 Device-IP evaluation, follow evaluation procedure below.

Check that both Xilinx board (SP605/ML605/KC705/ZC706 board) and adapter board are powered

•

off.

a) SP605/ML605: Connect USB mini-cable#1 to USB mini-connector on Xilinx board (J4 for

•

SP605/J22 for ML605) for JTAG programming.

b) KC705/ZC706: Connect USB micro cable to USB micro connector on Xilinx board (U29 for

KC705/U30 for ZC706) for JTAG programming.

Connect USB mini-cable#2 to USB mini-connector on Xilinx board (J23 for SP605/J21 for ML605/J6

•

for KC705/J21 for ZC706) for serial console I/F on HostPC.

Confirm that FMC interface voltage is 2.5V, and then connect adapter board (AB07-USB3FMC) to

•

the FMC-LPC connector on Xilinx board.

Confirm that JP1 on the adapter board is not jumped (OFF).

•

Connect USB3.0 AtoA cable with USB connector on the adapter board.

•

Connect opposite side of USB3.0 AtoA cable to the USB3.0 connector of the Host PC.

•

15 May 2015

Figure 10

Figure

10: Adapter board connection to SP605

: Adapter board connection to SP605

Page 8