DG Flugzeugbau DG-800S Manual de reparação - Página 6

Procurar online ou descarregar pdf Manual de reparação para Aeronaves DG Flugzeugbau DG-800S. DG Flugzeugbau DG-800S 14 páginas.

Tools and facilities required

Tools

- Accurate scale for the correct mixing of resin and hardener

- Containers and wood mixing sticks

- Brushes (short hair) to apply the resin

- Metal roller to press down the glass cloth and to force the air out to

reduce the formation of bubbles

- Scissors to cut the fabric

- Adhesive tape

- Plastic film for a tempering tent

- Hot air blower

- Abrasive paper - various grades

- Knife

- Saw to cut tough plastic

- Rubber hand gloves

- Accurate thermometer up to 60°C (140° F)

Facilities

To insure proper curing, the room temperature during repairwork and at

least 12 hours afterwards should be maintened at 21°C (70° F). After that

the repaired parts are to be tempered. Therefore you may construct

a tempering tent, using plastic film or styrofoam plates.

Issued: April 1997

Repair manual DG-800S