CPR AeroForce AP Manual rápido

Procurar online ou descarregar pdf Manual rápido para Bomba de água CPR AeroForce AP. CPR AeroForce AP 4 páginas.

CPR Aquatic, INC•P.O. Box 1111•3749 West End Road, Arcata, CA 95521

As many hobbyists venture into the world of reef keeping, a common goal among most is to keep the filtration

system as simple as possible. One of the most important components to filtration is the removal of compounds

which could eventually break down into ammonia and nitrite. The AeroForce

highly efficient protein skimmer for a reef system. The AeroForce

maintenance easier and for sturdier construction. Requiring no supplemental plumbing, the AeroForce

hangs on the back of the tank and can be installed in a few short minutes.

To place your AeroForce

1) Carefully remove all packaging and inspect the unit for damaged or missing parts. You should have:

(1) Outer acrylic body

(1) Inner protein skimmer body

(1) Pico400 (feed pump)

(1) MA400 air pump

(2) Wooden air diffusers

(1) Collection cup assembly with "O" ring and lid

(1) Support pin

If any items are damaged or missing, please contact your dealer immediately.

2) Rinse inside of the AeroForce

3) Remove inner body from outer body. The unit should come with the wooden air duiffusers installed on the inside

of the unit. Secure the two airlines coming out of the air diffusers to the air pump outlets and place the air

pump in a secure location. Insert the airline into the black airline clip on the side of the unit.

4) Slide the inner skimmer body into the outer body. The inlet pipe parts 1 and 2 should line up once the two bodies

are together (see page 4).

5) Attach the Pico4 (5) to the inlet part 2.

6) Hang the AeroForce

AeroForce

AP so that it is parallel to the back of the tank. Insert the support pin into the desired position

first, and then adjust the screws accordingly.

7) Clean the collection cup (1) including the throat of the funnel in hot water. This will cause the skimmer to begin

collecting waste faster. Do not use any detergents on the collection cup. Insert cup inside protein skimmer

section with O-ring placed around the outside. The o-ring acts as a support for the cup to rest on top of the

AeroForce

AP body. This is not intended to form a seal inside the body.

CPR Technical Support (707) 826-9636 • FAX (707) 826-9623

AeroForce

AP into operation:

AP with warm water. (optional, but recommended)

AP on your tank. Use the adjustment screws (7) and support pin (6) to position the

www.cprusa.com • [email protected]

AP (Air Pump)

AP is designed to provide a simple yet

AP employs a new dual-body chamber to make

simply