CPRO NBT5-22-RZ Manual do utilizador - Página 8
Procurar online ou descarregar pdf Manual do utilizador para Câmara de segurança CPRO NBT5-22-RZ. CPRO NBT5-22-RZ 12 páginas. 2m hd ip fixed bullet camera
Imprimir página
Installation -
Installation
Before installing your camera, you have to read the following cau�ons.
1. You have to check whether the loca�on can bear five �mes of the weight of your camera.
2. Don't let the cable to be caught in improper place or the electric line cover to be damaged. Otherwise
it may cause a breakdown or fire.
3. When installing your camera, don't allow any person to approach the installa�on site. If you have any
valuable things under the place, move them away.
Reset
T-W Jog Bu�on
Test Video Output
Reset to the Factory Default
Press the reset bu�on for 5 seconds to return the setup
to the factory default.
Warning
If you press the 'Reset' bu�on, you will lose all se�ng
data. If needed, please, make a note for further
installa�on.
Using the Template sheet, make the cabling hole on the
1
wall/ceiling.
Connect the network cable, power cable respec�vely.
2
See the sec�on 'Installa�on - Cabling' for details.
Fix the camera on the wall/ceiling by screw provided.
3
Loosen the Pan/Tilt stoper screw a li�e before fixing the camera.
By using the test video cable, check the screen during
SD Card Slot
4
installa�on. You can adjust the zoom ra�o using the
T-W jog bu�on.
WIDE
TELE
8
Zoom Out
Zoom In