Abatron BDI3000 Manual do utilizador - Página 7

Procurar online ou descarregar pdf Manual do utilizador para Hardware informático Abatron BDI3000. Abatron BDI3000 18 páginas. Bdipro
Também para Abatron BDI3000: Manual do utilizador (18 páginas)

Imprimir página

1. Bdi3000

bdiPro

for BDI3000 (XScale)

2.2 Connecting the BDI3000 to Power Supply

The BDI3000 needs to be supplied with the enclosed power supply from Abatron (5VDC).

Before use, check if the mains voltage is in accordance with the input voltage printed on power

supply. Make sure that, while operating, the power supply is not covered up and not situated near

a heater or in direct sun light. Dry location use only.

For error-free operation, the power supply to the BDI3000 must be between 4.75V and 5.25V DC.

The maximal tolerable supply voltage is 5.25 VDC. Any higher voltage or a wrong polarity

might destroy the electronics.

The green LED «BDI» marked light up when 5V power is connected to the BDI3000

Please switch on the system in the following sequence:

• 1 –> external power supply

• 2 –> target system

+5 VDC

GND

RS232

POWER

casing connected to ground terminal

TARGET A

TARGET B

User Manual

1.00