Allied Telesis AT-8948 Como configurar - Página 2

Procurar online ou descarregar pdf Como configurar para Router de rede Allied Telesis AT-8948. Allied Telesis AT-8948 9 páginas. At-8900 series
Também para Allied Telesis AT-8948: Ficha de dados (4 páginas), Ficha de dados (3 páginas), Ficha de dados (3 páginas), Ficha de dados (2 páginas), Ficha de dados (5 páginas), Visão geral (1 páginas), Brochura (8 páginas), Manual suplementar (6 páginas), Manual de instalação rápida (13 páginas)

Related How To Notes

For a detailed discussion of redundancy options on the server side, see How to Configure

Microsoft Windows 2003 Network Load Balancing Clustering with Allied Telesis Switches.

The following other How To Notes also use VRRP:

How To Configure An L3 Switch To Use Different MAC Addresses On Different VLANs

How To Configure Load Balancer Redundancy on Allied Telesis Routers and Switches

How To Notes are available from www.alliedtelesis.com/resources/literature/howto.aspx.

The two core switches are Layer 3 routing and define the IP address ranges for the VLANs

configured on the switches. The core switches are also running VRRP to provide router

redundancy for end devices such as the PCs and servers. The end devices are connected to

the core switches through Layer 2 distribution switches.

The core switches are configured with unique static IP addresses for each VLAN but share a

common virtual IP address for each VLAN. VRRP associates a virtual MAC address with

Page 2 | AlliedWare™ OS How To Note: VRRP

ports 3-24

distribution switch 1

port 1

23, 24

core switch 1:

VRRP master

3-24

distribution switch 2

server farm

Related How To Notes

3-24

distribution switch 3

port 1

23, 24

core switch 2:

VRRP backup

example.eps

...