CPS CP922 Manual do utilizador - Página 3

Procurar online ou descarregar pdf Manual do utilizador para Transcetor CPS CP922. CPS CP922 13 páginas. Poc transceiver

3. INSTALLING ACCESSORIES

3.1 Installing the Battery Pack

Align the battery pack with the slot of the walkie talkie and push the battery

upwards until you hear a "click" sound.

3.2 Removing the Battery Pack

Power off the transceiver firstly,then press the battery latch up and slide it down

to remove the battery pack.

3.3 Installing the SIM card

First remove the two screws of the SIM card cover with a screwdriver,remove

the SIM card cover and the seal ring,and install the SIM card,then place the

seal ring and the SIM card cover,then lock the srews.

3.4 Installing the Belt Clip

Fix the transceiver and screw the belt clip from the back of transceiver,turning

It clock-wise until secure.

3.5 Removing the Belt Clip

Counter clockwise the screw from the back of transceiver,until remove.

3.6 Installing external Earphone

Use a screwdriver to screw up the headphone connector cover,open the

Headphone connector cover and sealing ring,then plug the headphone/

microphone into the headphone/microphone jack.

3.7 Removing external Earphone

Unplug the headphone/microphone,fix the headphone connector cover and

Sealing ring,and then screw the headphone connector cover with a screwdriver.

Note : If th SIM card cover,headphone interface cover and their sealing rings

are not fixed properly,the walkie talkie may leak form these areas !

4.1 Charging

1) Plug the power adapter into an electric socket.

2) Connect the USB charging cable between the power adapter and the USB

jact at the bottom of the battery pack.

3) Ensure the connection of each end is connected securely.

1) Plug the AC adaptor into a standard electrical outlet

2) Insert the Walkie Talkie into the charging tray for charging

The charging light will turn RED and it will turn GREEN

when fully charged (approximately 5 hours).