CPVan SM11R Manual de referência rápida - Página 4

Procurar online ou descarregar pdf Manual de referência rápida para Alarme de fumo CPVan SM11R. CPVan SM11R 6 páginas. Interlinked smoke detector

5. Fault status: the alarm will deliver beeps every 40

seconds.

Silence Mode

During the unit is alarming, you can push the test button, it

will be paused the unit alarming for approx 10 minutes. The

red LED will flash once every 8 seconds, it indicates the

smoke alarm device is running into the silence mode.The

silence feature is to be used only when a known alarm

condition, such as smoke from cooking activates the

alarm.The smoke alarm device will automatically reset after

approximately 10 minutes, if after this period, particles of

combustion are still present, the alarm will sound again.

CAUTION:

Before using the alarm silence (silence), identify the source

of the smoke and be certain a safe condition exists.

Interlinked smoke detector

Radio-interlinked smoke detectors are interlinked through radio-

frequency signals. If one smoke alarm detects fire, all alarms go

off. In the case of

the battery operated radio-interlinked smoke alarms, no wiring is

required at all.

How to create the interlinked network

Step 1: Press the test/silence button on one of these smoke

alarms 4 times, and the green LED will rapidly flash continuously,

indicating it has entered the transmitting mode (valid time: 60

seconds) .

Step 2: Press the test/silence button on the other smoke alarms

twice, and the green LED will slowly flash continuously,

indicating it has entered the receiving mode.

-----If pairing is successful: The green LED of these alarms will

stop flashing.

-----When it is failure: The green light will continue to flash for

60 seconds, and then the red light will stay on for 2 seconds.

How to disabling the interconnect function

Press the test/silence button on the smoke alarms twice and the

green LED will slowly flash continuously still 60 seconds, then

ignore it and it will automatic despairing.

How to silence the alarms in network when alarm

If the smoke alarm detects fire, the device will goes into

Source/Master smoke alarm sound pattern alarmed, and emits the

alarm signal;