Dell C600 - Latitude Intel P-4 1.4GHz Manual de serviço - Página 43
Procurar online ou descarregar pdf Manual de serviço para Computador portátil Dell C600 - Latitude Intel P-4 1.4GHz. Dell C600 - Latitude Intel P-4 1.4GHz 46 páginas. Latitude c600/c500 series
Também para Dell C600 - Latitude Intel P-4 1.4GHz: Manual de serviço (48 páginas)
Imprimir página
Removing and Replacing Parts : Dell Latitude C600/C500 Series Service Manual
11. Turn the bottom case assembly over and remove the M2.5 x 5-mm screw, which is identified by a white "circle B" and
arrow on a red label attached to the top of the battery connector on the front center of the system board.
12. Remove the
speakers
13. Pull the right side of bottom case assembly, next to the external headphone and microphone connectors, away from
the system board assembly as you simultaneously lift the front of the system board assembly out and away from the
bottom case assembly.
Replacing the System Board
1. Install the
microprocessor
2. Connect the
right
3. Install the replacement system board.
a. Insert the external microphone and headphone connectors through the plastic bottom case assembly.
b. Replace the nine M2.5 x 5-mm screws, starting on the right side of the bottom case assembly.
c. Replace the fan guard cover, inserting the tab into the bottom case assembly and replace the three M2.5 x 5-
mm screws (see
first, it makes it easier to insert and replace the other two screws.
4. Replace the memory modules, mini-PCI card, speaker assemblies, and the thermal cooling assembly removed from
the old system board.
NOTE:
Be sure to route cables so that they will not be crimped or pinched when the complete assembly is put back
together.
file:///I|/SERVICE%20MANUALS/DELL%20MANUALS/L...600/C500%20C600%20Service%20Manual/remove.htm (34 of 36)6/21/2004 1:22:14 AM
from the bottom case assembly.
on the replacement system board.
and
left
speaker to the replacement system board.
"Removing the System Board Assembly
Screws"). If you replace the screw opposite the tab