Dell D800 - Latitude 15.4" Notebook Manual de serviço - Página 14

Procurar online ou descarregar pdf Manual de serviço para Computador portátil Dell D800 - Latitude 15.4" Notebook. Dell D800 - Latitude 15.4" Notebook 49 páginas. Dell latitude e6400: quick start
Também para Dell D800 - Latitude 15.4" Notebook: Manual de serviço (3 páginas), Informações sobre a configuração e as características (8 páginas)

Imprimir página
Dell D800 - Latitude 15.4
 
NOTICE:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such
as the back panel) on the computer.
1.  Follow the instructions in
"Preparing to Work Inside the
2.  Remove the
central control
3.  Remove the
display
assembly.
4.  Use a plastic scribe to pry the eight display bumpers out of the screw holes located on the front of the bezel.
5.  Remove the eight M2.5 x 6-mm screws located on the front of the bezel.
 
NOTICE:
Carefully separate the bezel from the top cover to avoid damage to the bezel.
6.  Starting at the bottom of the display panel (by the DELL™ logo), use your fingers to separate the bezel from the top cover by lifting the inside edge of 
the bezel away from the top cover.
 

Display Panel

 
CAUTION:
Before performing the following procedures, read the safety instructions in your System Information Guide.
 
NOTICE:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by touching an unpainted metal surface on the computer.
1.  Follow the instructions in
"Preparing to Work Inside the
2.  Remove the
central control
3.  Remove the
display
assembly.
4.  Remove the
display
bezel.
5.  Remove the nine M2 x 3-mm screws from the display panel.
6.  Lift the display panel, and rotate the display panel out of the top cover.
7.  Remove the yellow tape from the top display connector.
8.  Press in the tabs on both sides of the top display-cable connector, and pull the display cable connector away from the top flex-cable connector.
 
 
1  top flex-cable connector
2  top display-cable connector
3  tabs
9.  Use the pull-tab to disconnect the bottom flex-cable connector from the inverter connector.
 
Computer."
cover.
Computer."
cover.