Allied Telesis AT-IMC100T/SCMM Manual de instalação - Página 17
Procurar online ou descarregar pdf Manual de instalação para Conversor de multimédia Allied Telesis AT-IMC100T/SCMM. Allied Telesis AT-IMC100T/SCMM 20 páginas. Fast ethernet industrial media converter
Imprimir página
Cabling Installation
Installing Copper Ethernet Cable
4. Cabling Installation
4.1 Installing Copper Ethernet Cable
4.1.1 Insert one side of Category 5 cables into the Ethernet port (RJ-45 port) and another side of
category 5 cables to the network devices' Ethernet port (RJ-45 port), ex: switch, PC, or Server. The
UTP port (RJ-45) LED on the unit will light up when the cable is connected and network is active. Please
refer to the section
LED Indicators
for LED light meaning.
4.1.2 Connect fiber cabling as explained in paragraph 2.7.2.
4.1.3 When all connections are all set and LED lights all show in normal, the installation is complete.
4.2 Installing SFP Module and Fiber Cable
4.2.1 The cable between the link partner (switch, hub, workstation, etc.) and the converter must be
less than 100 meters (328 ft.) long and comply with the IEEE 802.3ab 1000Base-T standard for Category
5e or above.
4.2.2 Fiber segment using single-mode connector type must use 9/125ìm single-mode fiber cable. You
can connect two devices in the distance of 10km or more, accordingly with the SFP module capabilities.
Fiber segment using multi-mode connector type must use 50/125 or 62.5/125ìm multi-mode fiber cable.
You can connect two devices up to 550m distances.
4.2.3 The small form-factor pluggable (SFP module) is a compact optical transceiver used in optical
communications for both telecommunication and data communication applications.
AT-IMC100T/SCSM and AT-IMC100T/SCMM Fast Ethernet Industrial Media Converters
17