Craden DP8 Manual suplementar - Página 2
Procurar online ou descarregar pdf Manual suplementar para Acessórios para impressoras Craden DP8. Craden DP8 18 páginas. Transaction printers
Também para Craden DP8: Manual técnico (8 páginas), Manual de instalação (2 páginas), Manual do balcão de apoio (19 páginas)
Imprimir página5.1.4 Printhead Cleaning
Perform if printwires stick when printing begins or print quality becomes intermittent. Be sure
to check the ribbon first! The 73297-8 Printer Cleaning Kit contains all necessary tools.
1. Open the cabinet and remove the ribbon cartridge.
2. Remove the printhead attachment screw.
3. Disconnect the printhead from the printhead flex cables.
4. Clean the tip of the printhead nose where the printwires extend from the printhead with an
alcohol wetted napkin. Remove all ink and bits of ribbon fabric lint.
5. Use the blunt end of a printhead cleaning brush to remove the bulk of the grease packed
around the printwires. Then wet the brush end with alcohol to remove the rest of the grease
from the printwires. Wipe the grease, ink and ribbon fabric "lint" from the brush onto the
napkin provided. Remove all residual alcohol
6. Reconnect the printhead to the flex cables and remount the printhead. Insure that the flex
cables don't touch the carriage belt drive pulley or idler pulley bracket when the carriage
approaches the left and right box flanges.
7. Reinstall the ribbon cartridge. Perform a test print.
5.1.5 Document Print Area Cleaning
Accumulated paper dust should occasionally be removed from the platen, printhead, carriage
shaft, feed rollers, document sensors and other document path areas with brush, vacuum or
compressed air.
5.1.6 Cabinet Exterior Cleaning
The cabinet can be cleaned with a damp cloth and a mild, liquid soap or detergent. Do not
use harsh, abrasive cleaners.
28
DP8/9 carriage top view
Printhead attachment screw