Avtek 1EVA11 Manual rápido - Página 5

Procurar online ou descarregar pdf Manual rápido para Ecrã de projeção Avtek 1EVA11. Avtek 1EVA11 6 páginas.

4. Operating instructions

Pairing the trigger with the receiver

Having connected the receiver to the mains, press the "CODE" button on the receiver and hold it pressed for 1 second. The

red LED indicator on the receiver will start blinking and it will keep blinking for 10 seconds. During that time press the "CODE"

button on the trigger unit. When the two devices are paired correctly, the blue LED indicator on the receiver will blink three

times quickly.

Power on

Press CODE on receiver

for 1 second

Setting up the trigger to work with the projector

Having connected the trigger to the mains, press the "SET" button and hold it pressed for 3 seconds. The LED indicator on the

trigger will start blinking. It will keep blinking for 10 seconds and will also sound a single short beep. Next, turn the projector on.

The trigger will remember the necessary settings automatically.

As soon as the trigger has been set up to work with the projector correctly, the LED indicator on the trigger will blink 3 times

and the trigger will sound 3 short beeps.

If there is only one beep and the LED indicator lights up only once, that will mean the setting has failed.

Press SET on receiver

Power on

for 3 sec.

If the devices have been set up correctly, they will interact with each other as follows:

As soon as the projector has been turned on, the projection screen will be lowered automatically.

As soon as the projector has been turned off, the projection screen will be rolled up automatically.

within 10 seconds

Red light on receiver

flashes slowly for 10 sec.

BEEP

within 10 seconds

Buzzer

Red light on receiver

buzz

flashes slowly for 10 sec.

Press CODE

Blue light on receiver

on the trigger

flashes quickly 3 times

Led on trigger flashes quickly 3 times

with buzzer 3 times beep

Turn on

the projector

Led on trigger flashes 1 time

with buzzer 1 time beep

Receiver paired

BEEP

Setting

successfull

BEEP

Setting

failed