Dell 2707WFP - UltraSharp - 27" LCD Monitor Manual do utilizador - Página 40

Procurar online ou descarregar pdf Manual do utilizador para Ambiente de trabalho Dell 2707WFP - UltraSharp - 27" LCD Monitor. Dell 2707WFP - UltraSharp - 27" LCD Monitor 49 páginas. Flat panel monitor
Também para Dell 2707WFP - UltraSharp - 27" LCD Monitor: Manual de configuração (2 páginas), Ficha técnica (4 páginas)

Imprimir página

This means that the monitor cannot synchronize with the signal that it is receiving from the computer. See

Vertical frequency ranges addressable by this monitor. Recommended mode is 1920 X 1200.

You will see the following message before the DDC/CI function is disabled.

When monitor enters Power Save mode, the following message appears :

Activate the computer and wake up the monitor to gain access to the

If you press any button other than the power button one of the following messages will appear depending on the selected input:

VGA / DVI-D input

In PIP mode, when the monitor does not sense the selected second signal input, one of the following messages will appear depending upon the selected input as

long as the OSD screen is closed.

1. VGA

If either VGA or DVI-D input is selected and both VGA and DVI-D cables are not connected, a floating dialog box as shown below appears.

NOTE: When the cable is connected back to the input of the monitor, any active PIP/PBP window will disappear. Please enter PIP /PBP submenu to bring back the PIP/PBPwindow.

NOTE: The PIP/PBP functions can bring up a picture from a second image source. Thus you can watch images from 1 PC source (D-Sub or DVI) and 1 Video Source (Composite or S

functions will not allow for 2 PC sources or 2 Video sources to perform PIP/PBP.

See

Solving Problems

for more information.

Using the Dell Soundbar (Optional)

OSD

2. DVI-D

Monitor Specifications

3. S-Video

for the Horizontal and

Video Input

4. Composite