Dell 3008WFP - UltraSharp - 30" LCD Monitor Manual do utilizador - Página 4
Procurar online ou descarregar pdf Manual do utilizador para Ambiente de trabalho Dell 3008WFP - UltraSharp - 30" LCD Monitor. Dell 3008WFP - UltraSharp - 30" LCD Monitor 38 páginas. Flat panel monitor
Também para Dell 3008WFP - UltraSharp - 30" LCD Monitor: Manual de configuração (2 páginas), Especificações (2 páginas), Brochura (2 páginas)
Imprimir página
Bottom View
Bottom view
Label Description
1
AC power cord connector
DC power connector for Dell
2
Soundbar
3
Audio connectors
4
Audio connector
5
VGA connector
6
Component video connectors
7
DisplayPort connector
8
HDMI connector
9
DVI connectors
10
Composite video connector
11
S-Video connector
12
USB upstream port
13
USB downstream ports
Monitor Specifications
The following sections give you information about the various power management modes and pin assignments for various connectors for your monitor.
Power Management Modes
If you have VESA's DPM™ compliance display card or software installed in your PC, the monitor can automatically reduce its power consumption when not in use. This is referred to as
Mode*. If the computer detects input from keyboard, mouse, or other input devices, the monitor automatically resumes functioning. The following table shows the power consumption and
of this automatic power saving feature:
VESA Modes
Normal operation (with Dell Soundbar and USB active) Active
Normal operation
Active-off mode
Switch off
The OSD will only function in the normal operation mode. When the menu or plus buttons are pressed in Active-off mode, one of the following messages will be displayed:
Analog Input In Power Save Mode. Press Computer Power Button or Any Key on Keyboard or Move Mouse
OR
Digital Input In Power Save Mode. Press Computer Power Button or Any Key on Keyboard or Move Mouse
Activate the computer and the monitor to gain access to the OSD.
NOTE:
While using the DisplayPort connector at 230v/50Hz, the DisplayPort consumes approximately 0.25W more than the VGA or DVI-D while in sleep mode.
* Zero power consumption in OFF mode can only be achieved by disconnecting the main cable from the monitor.
Bottom view with monitor stand
Use
Connect the power cord to wall outlet.
Connect the power cord for the Soundbar (optional).
Connect the HDMI 2.0 channel or 5.1 channel audio
output devices.
Connect the front left/right channel output to the green
connector. Use this connector for 2.0/2.1 channel audio
connection.
Connect the rear left/right channel output to the black
connector. Use this connector for 5.1 channel audio
connection.
Connect the center/subwoofer channel output to the
yellow connector. Use this connector for 5.1 channel
audio connection.
Connect the VGA cable from your computer to the
monitor.
Connect devices such as a DVD player, set-top box, or
cable TV box.
Connect the DisplayPort cable from your computer to
the monitor.
Connect devices such as a DVD player or set-top box.
Connect the DVI cable from your computer to the
monitor.
Use this to connect devices such as VCR or DVD player.
Use this to connect devices such as a video game
system, a digital camera, or a DVD player.
Connect the USB cable that came with your monitor to
the monitor and the computer. Once this cable is
connected you can use the USB connectors on the side
and bottom of the monitor.
Connect your USB devices.
Horizontal Sync Vertical Sync Video
Active
Active
Active
Inactive
Inactive
-
Power Indicator Power Consumption
Active
Blue
Active
Blue
Blanked Amber
-
-
Off
250 W (maximum)
163 W (typical)
Less than 2 W
Less than 1 W