Option
Miscellaneous Devices
Video screen options
Table 18. Video
Option
Primary Display
Security
Table 19. Security
Option
Admin Password
System Password
Internal HDD-0 Password
Strong Password
Password Configuration
Password Bypass
Password Change
Description
•
60 days
•
90 days
•
120 days
•
150 days
•
180 days
Allows you to enable or disable various on board devices.. The option Enable Secure Digital (SD)
Card is selected by default.
•
Enable Secure Digital (SD) Card
•
Secure Digital (SD) Card Boot
•
Secure Digital (SD) Card Read-Only Mode
Description
Allows you to select the primary display when multiple controllers are available in the system.
•
Auto (default)
•
Intel HD Graphics
NOTE:
If you do not select Auto, the on-board graphics device will be present and enabled.
Description
Allows you to set, change, and delete the admin password.
Allows you to set, change, and delete the system password.
Allows you to set, change, and delete the computer's internal HDD.
This option lets you enable or disable strong passwords for the system.
Allows you to control the minimum and maximum number of characters allowed for a administrative
password and the system password. The range of characters is between 4 and 32.
This option lets you bypass the System (Boot) Password and the internal HDD password prompts
during a system restart.
•
Disabled — Always prompt for the system and internal HDD password when they are set. This
option is disabled by default.
•
Reboot Bypass — Bypass the password prompts on Restarts (warm boots).
NOTE:
The system will always prompt for the system and internal HDD passwords when
powered on from the off state (a cold boot). Also, the system will always prompt for
passwords on any module bay HDDs that may be present.
This option lets you determine whether changes to the System and Hard Disk passwords are
permitted when an administrator password is set.
System setup
21
Imprimir página