Dell D13M Manual do Proprietário - Página 33

Procurar online ou descarregar pdf Manual do Proprietário para Ambiente de trabalho Dell D13M. Dell D13M 50 páginas.

Imprimir página
Dell D13M Manual do Proprietário
Table 13. Maintenance
Option
Service Tag
Asset Tag
SERR Messages
BIOS Downgrade
Data Wipe
BIOS Recovery
Table 14. Cloud desktop
Option
Server Lookup Method
Server Name
Server IP Address
Server Port
Client Address Method
Client IP Address
Client Subnet Mask
Client Gateway
DNS IP Address
Domain Name
Advanced
Description
Displays the service tag of your computer.
Allows you to create a system asset tag if an asset tag is not already set.
This option is not set by default.
Allows you to control the SERR message mechanism. This option is not set
by default. Some graphics cards require that the SERR message
mechanism be disabled.
Allows you to control the flashing of the system firmware to previous
revisions. This option is enabled by default.
Allows you to securely erase data from all internal storage devices. The
option is disabled by default.
Allows you to recover from certain corrupted BIOS conditions using a
recovery file. This option is enabled by default.
Description
Allows you to specify how the Cloud Desktop software will lookup server
addresses. The options are:
•
Static IP
•
DNS (default)
Allows you to specify the Server Name of the server.
Specifies the primary static IP address of the Cloud Desktop Server with
which the client software communicates. The default setting is
255.255.255.255
Allows you to specify the primary IP port of the Cloud Desktop with which
the client software communicates. The default setting is 06910.
Allows you to specify how the client will obtain its IP address. The options
are:
•
Static IP
•
DHCP (default)
Specifies the Static IP address of the client. The default setting is
255.255.255.255
Specifies the subnet mask of the client. The default setting is
255.255.255.255
Specifies the gateway of the client. The default setting is 255.255.255.255
Specifies the DNS IP address of the client. The default setting is
255.255.255.255
Specifies the Domain name of the client.
Allows you to enable Verbose Mode for advanced debugging. By default
this option is disabled.
33