Dell D18M Manual do Proprietário - Página 37

Procurar online ou descarregar pdf Manual do Proprietário para Ambiente de trabalho Dell D18M. Dell D18M 45 páginas. Remote power switch
Também para Dell D18M: Configuração e especificações (39 páginas), Manual de configuração e especificações (39 páginas), Manual de instalação (11 páginas)

Imprimir página

Table 12. POST Behavior

Option

Numlock LED

MEBx Hotkey

Keyboard Errors

Fast Boot

Table 13. Virtualization Support

Option

Virtualization

VT for Direct I/O

Trusted Execution

Table 14. Maintenance

Option

Service Tag

Asset Tag

SERR Messages

Dell Development

Configuration

BIOS Downgrade

Data Wipe

BIOS recovery

Description

Allows you to enable or disable the Numlock feature when your computer starts. This option

is enabled by default.

Allows you to specify whether the MEBx Hotkey function should be enabled when the

system boots. This option is enabled by default.

Allows you to enable or disable the keyboard error reporting when the computer starts. This

option is enabled by default.

This option can speed up the boot process by bypassing some compatibility steps:

•

Minimal — The system boots quickly, unless the BIOS has been updated, memory

changed, or the previous POST did not complete.

•

Thorough — The system does not skip any steps in the boot process.

•

Auto — This allows the operating system to control this setting (this works only when the

operating system supports Simple Boot Flag).

This option is set to Thorough by default.

Description

This option specifies whether a Virtual Machine Monitor (VMM) can utilize the additional

hardware capabilities provided by Intel® Virtualization Technology. Enable Intel

Virtualization Technology - This option is disabled by default.

Enables or disables the Virtual Machine Monitor (VMM) from utilizing the additional hardware

capabilities provided by Intel® Virtualization technology for direct I/O. Enable Intel

Virtualization Technology for Direct I/O - This option is disabled by default.

This option specifies whether a Measured Virtual Machine Monitor (MVMM) can utilize the

additional hardware capabilities provided by the Intel Trusted Execution Technology. This

option is disabled by default.

Description

Displays the Service Tag of your computer.

Allows you to create a system asset tag if an asset tag is not already set. This option is not set

by default.

Controls the SERR message mechanism. This option is not set by default. Some graphics

cards require that the SERR message mechanism be disabled.

Allows you to turn on/off certain features to control the BIOS. This option is disabled by

default.

Allows you to control flashing of the system firmware to the previous versions. This option is

enabled by default.

NOTE:

If this option is not selected, the flashing of the system firmware to the previous

versions is blocked.

Allows you to securely erase the data from all the available internal storages, such as HDD,

SSD, mSATA, and eMMC. This option is disabled by default.

Allows you to recover the corrupted BIOS conditions from the recovery files on the primary

hard drive or an external USB key.

System Setup