Dell Dimension 5100 Manual de serviço - Página 29
Procurar online ou descarregar pdf Manual de serviço para Ambiente de trabalho Dell Dimension 5100. Dell Dimension 5100 40 páginas. Setting up your computer
Também para Dell Dimension 5100: Configuração (2 páginas), Configuração (2 páginas), Configuração (2 páginas), Manual de configuração (2 páginas), Manual de configuração (2 páginas)
Imprimir página
20. Lift the front of the system board out and away from the base plastics.
Installing the System Board
1. Insert the video connector on the replacement system board through the back of the base plastics.
2. Replace the two hex nuts that secure the video connector to the base plastics.
3. Replace the two M2.5 x 5-mm screws that secure the left antenna, which is located between the hard drive and optical drive cages, to the system
board (Inspiron™ 5100 and 5150 only).
4. Replace the two M2.5 x 5-mm screws that secure the optical drive cage to the system board.
5. Replace the three M2.5 x 5-mm screws that secure the hard drive cage to the system board.
6. Replace the battery bay shield, and reinstall the two M2.5 x 5-mm screws that secure the shield to the system board.
7. Replace the speakers.
8. Replace the microprocessor.
NOTICE:
Squeeze all of the contents of the thermal grease packet (provided with the kit) on to the microprocessor thermal-cooling assembly.
9. Replace the
10. Replace the
11. Replace the
12. Replace the
13. Replace the keyboard.
14. Replace the
15. Replace the
16. Replace the
17. Insert the battery into the battery bay.
18. Connect the AC adapter to the computer and to an electrical outlet.
NOTICE:
damage to the computer.
NOTE:
After replacing the system board, enter the computer Service Tag sequence into the BIOS of the replacement system board.
19. Turn on the computer.
20. Insert the CD that accompanied the replacement system board into the appropriate drive, and turn on the computer. Follow the instructions on the
screen.
Back to Contents Page
Great user manuals database on
Before you replace the microprocessor thermal-cooling assembly, wipe the thermal grease off of the assembly with a clean paper towel.
microprocessor thermal-cooling
assembly.
palm
rest.
video card
and
EMI shield
that you removed from the old system board.
display
assembly.
Mini PCI
card, modem, and
memory module(s)
CD or DVD
drive.
hard
drive.
Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may result in
UserManuals.info
that you removed from the old system board.