Dell D90D7 Manual de instalação - Página 18

Procurar online ou descarregar pdf Manual de instalação para Servidor Dell D90D7. Dell D90D7 24 páginas. D class cloud clients
Também para Dell D90D7: Manual de início rápido (6 páginas), Manual de início rápido (8 páginas), Manual de início rápido (6 páginas), Manual de início rápido (6 páginas), Manual de início rápido (8 páginas), Manual de início rápido (10 páginas)

Chapter 5

Procedures

IMPORTANT: Complete the following procedures as an administrator (administrator

privileges are required).

Step 1: Download and Ready the Firmware You Require

You must download and ready (extract) the firmware you want to use for updating

your devices before you start the Wyse USB Firmware Tool wizard. Firmware files are

normally made available in .exe or .zip format and must be downloaded and then

extracted to a local hard drive folder that is available to the Wyse USB Firmware Tool

wizard.

Wyse provides firmware for supported devices from its Software Downloads Web site

at: http://www.wyse.com/serviceandsupport/support/downloads.asp. Simply select the

firmware you need in the Product Downloads Active box, click Search, and use the

Active Firmware link you need.

CAUTION: For the Windows 7 operating systems, be sure to right-click on the .exe file

you downloaded (for example, the BDB0_0846_4096.exe file for the D90D7 OS image)

and select the Run as administrator option to extract the files.

The following are examples of the Active Firmware links that you must use (names to

click) to download and extract the firmware to the local hard drive folder you want:

•

Step 2: Install Wyse USB Firmware Tool v1.20.0.1

1. Download the Wyse_USB_Firmware_Tool_v1.20.0.1.exe to a folder on your

2. Right-click the Wyse_USB_Firmware_Tool_v1.20.0.1.exe and click Run as

3. Enter the destination folder you want (for example, C:\USB_v_1.20.0.1) in the Unzip

4. After installation, create a shortcut on the desktop for the Wyse USB Firmware

D90D7 Only - BDB0_0858_8192.exe

D90DW Only - ADA0_S727_2048.exe

X90m7 Only - BXB8_0858_8192.exe

X90mw Only - AXA8_S716_2048.exe

Z90D7, Z90S7, and Z90DE7 Only - BZB0_0858_8192.exe

Z90DW and Z90SW Only - AZA0_S723_2048.exe

machine (go to http://www.wyse.com/serviceandsupport/support/downloads.asp, in

the Product Downloads Active list, select USB Firmware Tool under Wyse Imaging

Tools, click Search, and then download the Wyse USB Firmware Tool software).

administrator to execute the file and open the WinZip Self-Extractor dialog box.

to folder box, and then click Unzip to extract all files from the Wyse USB Firmware

Tool v1.20.0.1.exe file into the folder. The default directory for the extracted files is

C:\USB_v_1.20.0.1.

CAUTION: It is not recommended to use your desktop for the destination folder as

there are several files that will be extracted from the .exe file.

Tool.exe file (see your operating system documentation).